wiring a ceiling fan with light kit with remote control

Some fans may have multiple locking screws to hold the downrod in place.If you’re unsure about the way your specific fan is constructed and put together, check the manufacturer's instructions for more advice.Tighten the locking screws around the base of the downrod until it is securely attached to the fan body. Sit the downrod in place on the top of the fan body. Keeping the body of the fan on the ground, thread the wires attached to the fan through the downrod.

The downrod is the long metal pipe that is used to distance the fan from the ceiling. X Research sourceĪttach the downrod to the fan body. Loosen this screw and slip the cable clamp over the end of the wiring to remove it. If you notice a metal fixture tightly holding the wiring, look for a screw on the fixture's side. Some ceiling boxes will have cable clamps that secure the wiring in place.Look online or ask at your local hardware store to make sure that the weight rating for your box is more than the weight of your fan. If you're unsure whether or not your ceiling box will be able to hold your fan, look inside it for any markings or model numbers that will help identify it.Ask at your local hardware store or look online to find one that will be strong enough. If you're unsure, remove it and replace it with a new ceiling box that has a weight rating above the weight of your ceiling fan. Home Improvement Specialist Expert Interview. You shouldn’t use the existing ceiling box unless you are absolutely certain it is rated for a ceiling fan. Few standard ceiling boxes will be sturdy enough to hold the weight of a spinning ceiling fan.If not, use a flashlight to look at it from below and work out the easiest way to remove it.

If you can access the space above the ceiling box and get a better look at it, it may be easier to remove.

Push the circuit box further into the ceiling, or attempt to pry it out to remove it. Look for any screws or nails holding the old ceiling box in place and remove them. The ceiling box is a circular metal fitting that other fixtures attach to.

Wiring a ceiling fan with light kit with remote control